Nobutaka Kobayashi
- Total activity 201
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 105
Articles
Recent activity by Nobutaka Kobayashi-
[01-00952-EN] How to improve a paper jam
＜The causes frequently observed> (1) Dirty media route. (2) Incorrect media loading method (especially the label guide is not aligned) < Measure > (1) Please clean the label route. CT4-LX: Cleaning...
-
[02-00131-EN] Incorrect Print and Cut Position
Applicable models: CL4NX/6NXPlease refer to the below. The Print Position Is Shifted Vertically from the Media Feed Direction The Print Position Is Shifted Horizontally from the Media Feed Directi...
-
[01-00704-EN] Cleaning Using the Cleaning Kit
The cleaning procedure using the cleaning kit is as follows: Never use organic solvents, such as thinner and benzine to clean the product. For details on the cleaning kit, refer to the...
-
[01-00050-EN] How to load media (Label and ribbon)
Please refer to the below links for loading media.<Loading the media >- Roll type - Fan-fold type - With optional Cutter Unit - With Optional Dispenser Unit and Liner Discharge Outlet - With Option...
-
[01-01433-EN] Optional Devices
The optional devices for the product are as follows. The optional devices can be factory installed or installed by the customer engineer. Contact your SATO reseller or technical support. Opti...
-
[01-01547-EN] Media Is Fed According to the Specified Number, but Not Printed
Applicable models: CL4NX/6NXPlease refer to the below. What to check Countermeasure Are the media and ribbon loaded correctly? Load the media and ribbon correctly. Loading Media Loading...
-
[01-01594-EN] The LED Lights Red
Applicable models: CL4NX/6NX Please refer to the below. When the LED on the operator panel lights red, an error has occurred. Clear the error according to the message on the screen. • ...
-
[01-00006-EN] Cannot Communicate nor Output
Applicable models: CL4NX/6NX PlusPlease refer to the below. Cannot Output After Data Is Sent Cannot Communicate via LAN Cannot Communicate via USB Cannot Communicate via Bluetooth Cannot Communica...
-
[01-00005-EN] Problems with display
Applicable models: CL4NX/6NX PlusPlease refer to the below. No Power/Nothing on the Screen Want to Change the Display Language The LED Lights Red Want to Adjust the Buzzer Volume of the Err...
-
[02-00116-EN] Incorrect Print and Cut Position
Applicable models: CL4NX/6NX PlusPlease refer to the below. Want to Use Without Cutting Even If the Cutter Unit Is Installed Print Stop Position and Cut Position Are Shifted The Media Is Not Cu...