[02-67920-EN] CT4-LX TOP FAQ

CT4-LX

• [01-00977-EN] Replacing the Print Head

• [01-00952-EN] How to improve a paper jam

• [01-00077-EN] Troubleshooting(When Using the Product)

• [01-00078-EN] Loading Ribbon (Thermal Transfer Only)

• [01-00079-EN] Cleaning the Product

• [01-00080-EN] When an Error Message Appears

• [01-00092-EN] When You Are in Trouble

• [01-00081-EN] Sensor Auto-Calibration is failed

• [01-00082-EN] Cannot Communicate nor Output

• [01-00083-EN] Problems with display

• [01-00084-EN] Incorrect Print and Cut Position

• [01-00085-EN] The Media Has Jammed

• [01-00086-EN] Want to Improve the Print Quality

• [01-00087-EN]Loading Media

• [01-00088-EN] How to load media (Label and ribbon)

• [01-00089-EN] How to solve an error message 1028 (Gap not found)

• [01-00090-EN] How to cancel a print job during printing at printer side.

• [01-00091-EN] How to solve an error message 1008 (Out of Paper)

• [01-00093-EN] How to deal with error message 1035 (I-mark not found) error

• [01-00094-EN] How to adjust when printing quality is not satisfactory

• [01-00095-EN] How to solve an error message 1017

• [01-00096-EN] How to deal with a printer that does not work after issuing a print instruction

• [01-00097-EN] How to adjust when the print position is not right

• [01-00098-EN] How to set and change the media.

• [02-00141-EN] Searching from an Image of the Product

• [02-00142-EN] Replacing Consumable Parts

• [02-00143-EN] Specifications

• [02-00144-EN] Status Icon

• [01-01006-EN] IParts Identification (Internal View)

• [01-01005-EN] Parts Identification (Rear View)

• [01-01004-EN] Parts Identification (Front View)

• [02-00148-CN]Adjusting the Product

• [02-00149-EN] How to adjust a vertical printing position.

• [02-00150-EN] How to check a Printhead resolution (dpi)